VWSyncro Logo
Search | Clear search
Only one result found, previewing...

Click for larger/smaller image
Click for larger/smaller image
Item title
Easyweld rods test #2
Full description
I cut the pipe and bevelled the edges as per the instructions on the easyweld website (bit more detailed than the ones on the pamphlet) and cleaned them up with a stainless brush. The one included with the kits is ok to begin with but I think for more ambitious projects a slightly bigger brush is more effective.


My plan is to cut a short section of steel pipe which is just small enough to fit inside each end of the cut holes and use that as a former and build up the surface of the part on the outside using the easyweld rods.

Info
Filesize: 133.2 kb
Created: 24/12/2015 03:52:12
Modified: 08/10/2010 00:57:00